Building Materials

Doors & Windows

Electrical

Farm & Ranch

Fasteners

Fencing

Hardware

Heating & Cooling

Home Interior

Kitchen & Bath

Lighting & Ceiling Fans

Outdoors

Paint

Pipe & Pipe Fittings

Plumbing

Storage & Organization

Tools

Tractor, Trailer & Auto

Workwear & Safety Gear

Home » Building Materials » Insulation » Sheathing Board » 3/4" 4x8' Foamular Insulation Board

3/4" 4x8' Foamular Insulation Board


by Owens Corning
McCoy's Part #:05065010
3/4" 4x8' Foamular Insulation Board

3/4" 4x8' Foamular Insulation Board
3/4" 4x8' Foamular Insulation Board
3/4" 4x8' Foamular Insulation Board
3/4" 4x8' Foamular Insulation Board

Not available at San Marcos

Product Information

Description
Foamular® Insulating Sheathing extruded polystyrene (XPS) rigid foam insulation contains hundreds of millions of densely packed closed cells to provide exceptional thermal performance. It's also virtually impervious to moisture, unlike other plastic foam insulation products. Foamular weighs considerably less than plywood, OSB or other non-insulation materials so it's easier, faster and safer to install. Insulating Sheathing (IS), is ideal for either wood or metal framing construction, suits a variety of exterior finishes and creates an effective insulating envelope over the entire structure. Used in fire-rated exterior wall assemblies for application in a commercial building. Insulating Sheathing can be scored and snapped, cut, or sawed with common tools. Retains its long-term R-value year after year, even following prolonged exposure to water leakage, humidity, condensation, ground water and freeze/thaw cycling. Contains a minimum of 20% certified recycled content, certified GreenGuard Indoor Air Quality for Children and Schools, Energy Star Seal and Insulate Program, and NAHB Green approved. Owens Corning Foam Insulation, LLC now warrants a Lifetime Limited Warranty* on Foamular® (XPS) Foam Insulation products. This new, enhanced warranty indicates that for the lifetime of the product, Foamular® XPS Insulation products are free from defects in material and/or workmanship that materially affect the performance of the product in a building installation.
Features
  • Exceptional thermal performance at R-5 per inch
  • Virtually impervious to moisture penetration
  • For exterior wall sheathing; a component of Owens Corning’s PINK THERMAL WALL system
  • Easy to handle, cut and install without the difficulties of foil facing
  • Compressive strength of 15 psi; ASTM C578 Type X
  • Will retain at least 90 percent of their advertised R-value
  • Can be scored and snapped, cut, or sawed with common tools
  • Contains a minimum of 20% certified recycled content,
  • Used in fire-rated exterior wall assemblies for application in a commercial building
Specifications
This product has no specifications.