Building Materials

Doors & Windows

Electrical

Farm & Ranch

Fasteners

Fencing

Hardware

Heating & Cooling

Home Interior

Kitchen & Bath

Lighting & Ceiling Fans

Outdoors

Paint

Pipe & Pipe Fittings

Plumbing

Storage & Organization

Tools

Tractor, Trailer & Auto

Workwear & Safety Gear

Home Store: Searcy
Home » Paint » Stains & Sealers » Exterior » Clear Multi-Surface Waterproofer - 1.2 Gallon

Clear Multi-Surface Waterproofer - 1.2 Gallon


by Thompson's WaterSeal
McCoy's Part #:26123032
Clear Multi-Surface Waterproofer - 1.2 Gallon

$13.99

Add To Cart
Product is Available at Searcy

Product Information

Description
Thompson’s® WaterSeal® Clear Multi-Surface Waterproofer provides proven waterproo?ng protection for wood, concrete and brick.
Features
  • Prevents water damage
  • Allows wood to gray naturally
  • Use on decks & fences, brick patios, concrete driveways, exterior surfaces
  • Use when mildew/biological factors are NOT a problem
  • Actual coverage will vary considerably due to porosity of surface materials
  • Dries clear
  • Beads & waterproofs
  • Do not use on asphalt
  • Apply with brush, roller or sprayer
  • Clean up with soap and water
Important Information
  • VOC Compliant
  • Exceeds all federal waterproofing standards for wood, concrete and brick
  • Do not apply if temperature will fall below 40 degrees
  • Concrete must be cured for 30 days, wood must be dry for 48 hours
More Info
  • ***Please Note - Actual coverage will vary considerably due to porosity of surface materials.***
  • ***Concrete must be cured for 30 days, wood must be dry for 48 hours***
  • Brick (approximate coverage)= 175 sq ft/gal
  • Concrete (approximate coverage)= 250 sq ft/gal
  • Smooth Concrete Block (approximate coverage)= 50 sq ft/gal
  • *Clay Tile & Quarry Tile (approximate coverage)= 250 sq ft/gal (*Wipe surface dry after 5-10 minutes)
  • Stucco (approximate coverage)= 250 sq ft/gal
  • *Slate - Masonite (approximate coverage)= 375 sq ft/gal (*Wipe surface dry after 5-10 minutes)
  • Rough Sawn Wood (approximate coverage)= 100 sq ft/gal
  • Smooth Finish Wood (approximate coverage)= 200 sq ft/gal
  • Plywood (approximate coverage)= 150 sq ft/gal
  • Wood Shingles (approximate coverage)= 100 sq ft/gal
Specifications
This product has no specifications.