https://www.mccoys.com/shop/p/28532014/hillman-838618-shaft-collar-38-in-dia-bore-34-in-od-zinc-plated
838618 Shaft Collar, 3/8 in Dia Bore, 3/4 in OD, Zinc-Plated
Sku: 28532014
$3.30
6 Available at
San Marcos
Location:
Aisle 2
Shaft collars are commonly used as mechanical stops, locating components and/or bearing faces within mechanical systems. They are easy to adjust with set screws. Shaft collars create a tight fit and greater holding power without the damage normally caused by set screws alone. To install, simply slide these collars on to a shaft and tighten the set screw to hold the collar in place.
- Effective on both hard and soft material shafts
- Easily installed where major assembly/disassembly would otherwise be required
- Zinc-plated for improved corrosion resistance
- Part of the Hillman deep drawer program
Bore Diameter
3/8
Outside Diameter
3/4
Finish
Zinc-Plated