https://www.mccoys.com/shop/p/28620208/hillman-5019-drive-wall-anchor-x-short-l-zinc-plated-2-pk
5019 Drive Wall Anchor, X-Short L, Zinc-Plated, 2 PK
Sku: 28620208
$1.99
11 Available at
San Marcos
Location:
Aisle 2
Hillman Wall Anchor Options:5019 Drive Wall X-Short 2 PK
Primarily used in drywall, the drive wall anchor is a medium-duty fastener for use in drywall, plaster and tile. The tip has a drive point to pierce drywall easily, no pre-drilling is required. The two prongs on the head of the shell, prevent the anchor from rotating during expansion. When the anchor is fully expanded, spider-like legs draw tightly against the backside of the wall. Once the body of the anchor is installed, the screw can be changed without disrupting the anchor.
- Greater holding power than nails and screws in hollow wall
- For use in drywall, plaster, tile and other light to medium-duty applications in hollow wall
- Drive point simplifies installation and requires no pre-drilling
- Fixtures can be removed and later replaced without disturbing the anchor
Diameter
1/8
Length
X-Short
Finish
Zinc-Plated