https://www.mccoys.com/shop/p/39101018/stihl-ms-261-cm-18-chainsaw-gasoline-502-cc-engine-displacement-2-stroke-single-cylinder-engine-18-in-l-bar
MS 261 CM 18 Chainsaw, Gasoline, 50.2 cc Engine Displacement, 2-Stroke, Single Cylinder Engine, 18 in L Bar
Sku: 39101018
$719.99
2 Available at
San Marcos
Location:
Aisle 33
Gas Chainsaws:Stihl MS 261 50.2 cc
The MS 261 C-M has all the same great features as the MS 261 low exhaust emissions, high-fuel efficiency and robust performance but also features the advanced Stihl M-Tronic™ engine management system. With Stihl M-Tronic™ an onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions including elevation, temperature, fuel quality, varying octane levels and dirty air filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.
- The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope
- The side access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw
- This time saving technology boosts the efficiency of the engine's filter system, doubling the time between air filter cleanings
- Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter
- This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance
- STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment
- The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience
- The STIHL Inc "caring for nature" seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions
- This product features M-Tronic™ a new generation of intelligent engine management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times
Engine Type
2-Stroke, Single Cylinder
Engine Displacement
50.2
Stroke Length
1.26
Engine Specifications
3 kW Power, 2800 rpm Idle Speed
Speed Rating
14,000
Bar/Chain Length
18
Bar/Chain Pitch
0.32
Chain Type
Oilomatic
Oil Tank Capacity
9.13
Control Type
Lever
Fuel Type
Gasoline
Fuel Tank Capacity
16.9
Start Type
Electronic
Handle Type
Ergonomic