Get free delivery on orders over $50 with code FREEDELIVERY. See details.

My Store: San Marcos
Open Today 7am-6pm
Find Stores

https://www.mccoys.com/shop/p/5531058-052303-28/prime-line-gd-12229-torsion-spring-1-34-in-id-2-in-od-32-in-oal-carbon-steel-plain
Prime-Line

GD 12229 Torsion Spring, 1-3/4 in ID, 2 in OD, 32 in OAL, Carbon Steel, Plain

Product SKU #5531058-052303-28
$76 .81
Ship to Store
5 As soon as 10/29
Delivery
5 As soon as 10/29
Free Pickup at San Marcos
5 SHIP TO STORE Check other stores
Members get savings and rewards! Sign in or join for FREE

Free & Easy Returns in Store


This torsion spring is constructed of steel and it includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion springs provide lifting force for heavy garage doors and must be selected by the spring's dimensions, rather than the door's weight. See the Product specifications found in Prime-Line's Torsion Spring Selection Guide to assure that the proper replacement spring has been selected. With dual spring installations, note that the proper use of LEFT WIND and RIGHT WIND springs is imperative. Also, when dual spring installations are involved, it is important to replace both springs, as replacing only 1 spring may add increased strain to the older non-replaced spring. This torsion spring is a regular duty spring with an estimated lifetime rating of 10,000 cycles. Determine the handing of your torsion spring wind, look at the end of the spring with the finger' of the spring at the top of the wind. When the end of the spring is at 12:00 o'clock and it is pointing to the left, the spring is a right wind, if the end of the spring points to right it is a left wind. When standing inside the garage looking out, the torsion spring with the black painted winding cone installs on-the right side of the door and the red painted winding cone installs on-the left side of the door. As an important safety precaution- all broken or malfunctioning hardware should be replaced with matching hardware, without any modifications. These garage door torsion springs can cause serious injury if not handled and installed properly. If attempting to replace the torsion springs yourself, it is important that the removal or adjustment of torsion springs is not attempted with any other tool other than Prime-Line's item number GD-52238. Failure to utilize Prime-Line's item number GD-52238 for the replacement of these springs may result in severe personal injury. Make sure to replace the left side as well, Prime-Line part GD 12229.

  • Requires the use of 2 winding rods for replacement
  • Winding cone and anchor cone attached
  • Easy to install

Weight Capacity
150
Overall Length
32
Inside Diameter
1-3/4
Outside Diameter
2
Wire Diameter
0.243
Material
Carbon Steel
Color
Red
Finish
Plain
Includes
Anchor Cone and Winding Cone

Similar Items