KC10HD CLO Door Closer, Automatic, Steel, White

These safety spring-activated door closers are constructed of diecast materials and come in a white painted finish. They are U.L. listed with a 1/2 hr fire rating and can be used to close doors weighing up to 150 lb. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy-to-install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method and they do not have a hold open feature. Distance of travel- The closer arm of this safety spring closer has the ability to swing a full 180 deg, but once it is mounted in place, the door's distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. For a rust and weather-resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include- black, brown, chrome-plated and satin chrome plated. Be sure to view the manufacturer's how to Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. do not overtighten, turning past 4 hole positions will cause this item to fail.